Posts by old_user90851

1) Questions and Answers : Windows : Power Outage now WU all messed up. (Message 17099) Posted 9 Nov 2005 by old_user90851 Post: No I did not, as I was also asking the question on the BOINC Synergy site. Yes I have now read your response and I thnak you for the clear explanation. I am in it for the science so I am going to let it run. It is frustrating to see all that work time gone by the way side.
2) Questions and Answers : Windows : Power Outage now WU all messed up. (Message 17095) Posted 9 Nov 2005 by old_user90851 Post: I had a pwr. outage the other day, and when I restarted the computer and CPDN, it appeared that all the work was lost. I had about 68% done at 280hrs. (To complete a WU on this computer takes about 455:00) It showed no cpu time and still 280:00, I have let it run for several days now, and it appears that it is starting all over again.It is now at 10% and 325:00. I have checked my file and it shows the last update as the 5th. of Nov. and I have tried many times to update since then. Any suggestions.
3) Questions and Answers : Windows : Power Outage, messed up my results. (Message 17005) Posted 6 Nov 2005 by old_user90851 Post: I live in the country and we just had a power outage, I am on battery backup, however it didn\'t do a soft shutdown as it was supposed to. Now when I restarted the computer and BOINC my WU is all messed up. It shows 281:00 hr \"CPU Time\", 0.68% \"Progress\" and 41375:04 hr. \"To completion\". The CPU Time is correct, however the Progress is way out, it should be around 68.0%. What if anything can I do to fix this issue. or should I just \"Reset the Project\" Are all those hours and data lost.?
4) Questions and Answers : Unix/Linux : CPDN Sulfur_cycle 4.21 (Message 16005) Posted 14 Sep 2005 by old_user90851 Post: I just did a complete uninstall and reinstall of BOINC. All is well with the download now, however I have a WU Sulfur_cycle 4.21 and I have a \"Computation error\" msg. I was wondering if anyone else has had this problem.? Don\'t seem to see any info on the BOINC website, relating to this. Is this serious, and is there a fix, or do I just Abort this WU.?
5) Questions and Answers : Unix/Linux : Still problems with Linux upload/dwnload.? (Message 15959) Posted 13 Sep 2005 by old_user90851 Post: I am still having problems with my linux computer uploading/dwnloading, CPDN/Seti. I have done a ping on both with CPDN returning 100% packet loss. Seti seems to work fine. Yet when I try to update either on the Linux box, I get \"Master file fetch failed.\" Now I have recently had to use a static IP address from my ISP, as there were some problems with the dial-up. Yet the Windows box was fine, can\'t figure that out.!! The Linux box did do fine with both CPDN/Seti until a few weeks ago. I have looked at my results at CPDN and it looks like the only results I am getting back are from the Windows box. (Phase 1) The Linux is now doing (Phase 3) I could really use some help with this, I have tried all that I can think of, and am now at a loss as to what to try next. Maybe I have to start again by uninstalling BOINC on the Linux box and do a fresh install. Any thoughts.
6) Questions and Answers : Unix/Linux : Download Msg. query (Message 15724) Posted 6 Sep 2005 by old_user90851 Post: > > I think that generally means the machine can't contact the server; either > the > > server is down or there's a glitch in the participant's setup. Has the > Linux > > machine been running CPDN okay before this problem? > Yes I have been running CPDN for about 440:00 now with no problem. > > > > If this is its first attempt, do you have a firewall? If so, is CPDN > & > > boinc listed as "good guys"? There must be access to Port 80. If not > the > > first attempt, was something in the Linux box changed when you activated > the > > Win machine? (I don't use a proxy, so if it's a proxy issue, I can't > help.) > OK how do I check if they are listed as "good guys"? I have a common Monitor, > but both machines are otherwise independant, as I have dial-up only. > > > > There is no problem running as many machines as you want from the same > > account. (I run five, with four [usually] in Linux and one [usually] in > > WinXP. Others run dozens of machines.) > > ___________________________________________ > > > > > >
7) Questions and Answers : Unix/Linux : Download Msg. query (Message 15723) Posted 6 Sep 2005 by old_user90851 Post: > I think that generally means the machine can't contact the server; either the > server is down or there's a glitch in the participant's setup. Has the Linux > machine been running CPDN okay before this problem? Yes I have been running CPDN for about 440:00 now the problem. > > If this is its first attempt, do you have a firewall? If so, is CPDN & > boinc listed as "good guys"? There must be access to Port 80. If not the > first attempt, was something in the Linux box changed when you activated the > Win machine? (I don't use a proxy, so if it's a proxy issue, I can't help.) OK how do I check if they are listed as "good guys"? I have a common Monitor, but both machines are otherwise independant, as I have dial-up only. > > There is no problem running as many machines as you want from the same > account. (I run five, with four [usually] in Linux and one [usually] in > WinXP. Others run dozens of machines.) > ___________________________________________ > >
8) Questions and Answers : Unix/Linux : Download Msg. query (Message 15711) Posted 5 Sep 2005 by old_user90851 Post: I have a GNU/Linux computer with CPDN and Seti (BOINC) on it and just got a Windows machine on which I have CPDN, Seti and LHC. When I try to do my uploads and dwnloads I get different msg. from both computers. On the windows it will do an update yet on the Linux I get \"Master File Fetch Failed\" Is this just related to the problems of the last week with both Seti and CPDN, or my other question is, can I have the same program running on multiple machines, without any problems.? I have done several reboots, no change.
9) Questions and Answers : Unix/Linux : Not showing Team joined (Message 15145) Posted 16 Aug 2005 by old_user90851 Post: I joined \"BOINC Synergy\" a week or so ago, on their site I show joined to \"CPDN\", yet on the \"CPDN\" site under my account it does not show me having joined any team. Any ideas on this.
10) Questions and Answers : Unix/Linux : Data run time.? (Message 15135) Posted 16 Aug 2005 by old_user90851 Post: > I am assuming that this it the file you are talking about. peterhin@GNULinux01:~/BOINC/projects/climateprediction.net$ ./viz ./hadsm3viz_4.13_i686-pc-linux-gnu: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory I am not sure where to go from here. FYI I am now down to 1880:00hrs with 11.5% done, so the hrs. are rolling dwn. > Thanks for the info. I am not sure where I should go to check the viz: > > There should be a file with execute permissions called viz in the > climateprediction.net directory. You should be able to just ./viz from > a terminal window. >
11) Questions and Answers : Unix/Linux : Data run time.? (Message 15132) Posted 16 Aug 2005 by old_user90851 Post: >Hello to you, Thanks for the info. I am not sure where I should go to check the viz: I am on a dial-up in the country, and so I do not have the computer connected all the time ( it will be on for blocks of a few hrs. of time) Hi, > This is a well known bug, but nothing to worry about: > A cpdn Wu has 3 phases, you probably completed the 1st and entered the 2nd > phase > > Linux version shows percent done as proportion of phase instead of model. This > leads to: > a) crazy time to completion early in phase 2 and 3. > b) Scheduling issues as a result of a). and > c) Download of extra model when approaching end of phase 1. > See <a> href="http://www.climateprediction.net/board/viewtopic.php?p=28502#28502">here</a> > > The second hypothesis is that your model has rewound at the beginning of the > model (the very long completion time is a clue: 2600 hours for 1 phase is > almost impossible) > > You should check in what phase you are by opening the viz: you'll be able to > see the real progress of your Wu and if you're in Phase 1 or phase 2. > If you're in phase 1, I suggest to reset the project. > If you're in phase 2, I suggest to do nothing :o) > > But in your account I see only 4 trickles: do you have a problem with your > internet connection and are you sure your model is really crunching ? 1 > Phase=24 trickles. > ----------------------------------------------- > <a href="http://boinc-doc.net/boinc-wiki/index.php?title=Main_Page">Boinc > Wiki</a> > <a href="http://forum.boinc.fr/">L'Alliance Francophone</a> >
12) Questions and Answers : Unix/Linux : Data run time.? (Message 15125) Posted 15 Aug 2005 by old_user90851 Post: I am new to the CPDN project. I have downloaded data to be processed, and after about 203:00hrs I got a 100% completed, then after connecting to the net (dial-up) it now gives me 7.95%, hrs. to completion as 2612:00. The unit I am working on is (hadsm 3.4.13) tmh_200200151_0 Can anyone explain to me why this is so. I am used to classic seti where when 100% is done then you get a new work unit, and start again.
13) Questions and Answers : Unix/Linux : 64 bit processor (Message 14923) Posted 4 Aug 2005 by old_user90851 Post: Will BOINC work under a 64 bit processor.? It has been suggested that the program should run twice? as fast. Is this a valid statement.?