climateprediction.net home page
W2000 Pro Freeze

W2000 Pro Freeze

Questions and Answers : Windows : W2000 Pro Freeze
Message board moderation

To post messages, you must log in.

AuthorMessage
old_user18559

Send message
Joined: 16 Sep 04
Posts: 1
Credit: 168,505
RAC: 0
Message 8478 - Posted: 2 Feb 2005, 18:33:01 UTC

Beginning last Dec my 1.4 P4 computer, running W2000 Pro, would freeze up with no error message, my screen did not go blank. After reformatting one of my disks, with 31G free space, I reinstalled Bonic 4.19 and ran hadsm3 4.04 with same result after approx. one hour. This does not occur when Bonic is not installed.

Any guess as to what might be the cause, and are there some diagnostics I could run to determine the cause of the freeze?
ID: 8478 · Report as offensive     Reply Quote
old_user44969

Send message
Joined: 28 Jan 05
Posts: 16
Credit: 5,796
RAC: 0
Message 8479 - Posted: 2 Feb 2005, 18:39:09 UTC

I had something very similar to this. I'm blaming it on the drivers for the video card. In my case, the PC froze after about 10mins which was when the screen saver would have started.

Having tried lots of things (processor tests etc) I found that the drivers for the video card were not up to date. I downloaded a new version and it has run fine ever since (I now can't stop it but that's another matter)

I would be intrested to know what you get when you run "dxdiag" and go to the video tab to see if Directx is enabled.

Hope this helps
ID: 8479 · Report as offensive     Reply Quote
Profile geophi
Volunteer moderator

Send message
Joined: 7 Aug 04
Posts: 2170
Credit: 64,555,907
RAC: 5,858
Message 8482 - Posted: 2 Feb 2005, 18:44:41 UTC
Last modified: 2 Feb 2005, 18:45:52 UTC

Are you saying it ran CPDN okay until December?

Perhaps it's heat related? Is it dusty inside your computer? Have any of the ventilation fans stopped working, or perhaps aren't working as well as they should.

For diagnostic purposes:

Run <a href="http://files.extremeoverclocking.com/file.php?f=36">SuperPI</a> for the maximum amount of time to see if there are any errors.

Run <a href="http://www.memtest.org/">memtest86+</a> to check out your memory (let it run for several hours at least).

Run <a href="http://www.mersenne.org/freesoft.htm">Prime95</a> torture test for several hours to see if there are errors.

If errors crop up, cooling may be a problem for the processor, or RAM quality or RAM timings may be a problem with the memory.
ID: 8482 · Report as offensive     Reply Quote

Questions and Answers : Windows : W2000 Pro Freeze

©2024 climateprediction.net