climateprediction.net home page
Lazy CPU

Lazy CPU

Message boards : Number crunching : Lazy CPU
Message board moderation

To post messages, you must log in.

AuthorMessage
old_user2290

Send message
Joined: 28 Aug 04
Posts: 7
Credit: 119,472
RAC: 0
Message 6000 - Posted: 10 Nov 2004, 2:40:09 UTC

I have a 2.6 GHz Pentium 4 running XP-Home Edition with Service Pack 2.

A couple of days ago, the system really slowed down, and is only logging one second of CPU time in about five seconds. The Task Manager shows hadsm3um_4.03 running about 14 to 18 percent, and System Idle Process running 80 to 85 percent.

What happened? Is there some setpoint in BOINC that can limit its use of the CUP time?
ID: 6000 · Report as offensive     Reply Quote
Jord
Avatar

Send message
Joined: 5 Aug 04
Posts: 250
Credit: 93,274
RAC: 0
Message 6008 - Posted: 10 Nov 2004, 13:59:46 UTC

Have you tried to reboot your system, to see if that cleared things up?
--------------------------------
Jordâ„¢

<img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=2&amp;trans=off">
ID: 6008 · Report as offensive     Reply Quote
old_user2290

Send message
Joined: 28 Aug 04
Posts: 7
Credit: 119,472
RAC: 0
Message 6011 - Posted: 10 Nov 2004, 15:51:43 UTC - in response to Message 6008.  

&gt; Have you tried to reboot your system, to see if that cleared things up?
&gt; --------------------------------
&gt; Jordâ„¢
&gt;
Thanks for the suggestion, but I have tried several times. That is always the first thing I try.

Another thing I just noticed. When BOINC switched from SETI to CPDN while I was watching, things went at full speed for about 10 to 15 seconds, then slowed back down to 20%. I had the Performance Monitor program working, and got the %Processor graph to jump to the top for a few seconds. It does the same thing when I exit and then re-start BOINC. I suppose this could just be the start-up of the crunching programs using the CPU instead of the actual processing of the data.
ID: 6011 · Report as offensive     Reply Quote
Kenneth Larsen

Send message
Joined: 26 Aug 04
Posts: 59
Credit: 438,133
RAC: 0
Message 6017 - Posted: 11 Nov 2004, 12:40:34 UTC

Under Control Panel/System, look under Advanced, on top of that page you can set the settings for Performance, click this. Then under Advanced on this page there are two options, Processor Scheduling and Memory Usage. Check that they are both set for Programs.
I don't know if this is the problem, but it might be.
ID: 6017 · Report as offensive     Reply Quote
old_user9662

Send message
Joined: 2 Sep 04
Posts: 29
Credit: 13,100
RAC: 0
Message 6027 - Posted: 11 Nov 2004, 17:27:46 UTC

I'm not sure about PCs, as I have a Mac, but I think I read somewhere that if you don't have enough disk space on your hard drive, it will slow the CPDN down a lot...

C
<img src="http://www.boincstats.com/stats/banner.php?cpid=a7211a7321f3fd3cdc8eda3361db9b94" border="0">
ID: 6027 · Report as offensive     Reply Quote
Profile Andrew Hingston
Volunteer moderator

Send message
Joined: 17 Aug 04
Posts: 753
Credit: 9,804,700
RAC: 0
Message 6037 - Posted: 11 Nov 2004, 19:54:45 UTC

It was certainly said under classic that defragging the disk could make a difference, so the same should apply under BOINC.
ID: 6037 · Report as offensive     Reply Quote
old_user2290

Send message
Joined: 28 Aug 04
Posts: 7
Credit: 119,472
RAC: 0
Message 6038 - Posted: 11 Nov 2004, 20:22:44 UTC - in response to Message 6017.  

&gt; Under Control Panel/System, look under Advanced, on top of that page you can
&gt; set the settings for Performance, click this. Then under Advanced on this page
&gt; there are two options, Processor Scheduling and Memory Usage. Check that they
&gt; are both set for Programs.
&gt; I don't know if this is the problem, but it might be.
&gt;
The Processor Scheduling was set for background services, so I changed it. Then I rebooted just in case that was necessary. However, there was no effect. I am still using only around 20% of the processor's time when BOINC is running by itself. If another program is running it can jump up to 100%.

It has been a while since I defragged this machine, so I will do that for the next few hours and see what happens.

Thanx to all.
ID: 6038 · Report as offensive     Reply Quote
Kenneth Larsen

Send message
Joined: 26 Aug 04
Posts: 59
Credit: 438,133
RAC: 0
Message 6067 - Posted: 12 Nov 2004, 19:38:51 UTC

Well, I'm afraid I can't help you anymore then :-(
Have you tried checking your pc for virus or trojan horses?
ID: 6067 · Report as offensive     Reply Quote
old_user412

Send message
Joined: 7 Aug 04
Posts: 18
Credit: 70,985
RAC: 0
Message 6075 - Posted: 13 Nov 2004, 13:39:56 UTC

Have you checked that the CPU is not over-heating. I believe Pentium 4's "throttle back" if they get too hot. Maybe worth checking that the fan &amp; heatsink are relatively dust-free.
HTH, Alan
<img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=9">
ID: 6075 · Report as offensive     Reply Quote
Yeti
Avatar

Send message
Joined: 5 Aug 04
Posts: 170
Credit: 9,708,411
RAC: 13,727
Message 6079 - Posted: 13 Nov 2004, 19:12:16 UTC
Last modified: 13 Nov 2004, 19:13:15 UTC

Hm, which BOINC-Version are you running ?

<a href="http://www.boinc.dk/index.php?page=user_statistics&amp;project=cpdn&amp;userid=34"><img border="0" height="080" src="http://34.cpdn.sig.boinc.dk?188"></a>

Supporting <b>BOINC</b>, because it is really a <b>great concept !</b>
ID: 6079 · Report as offensive     Reply Quote
old_user2290

Send message
Joined: 28 Aug 04
Posts: 7
Credit: 119,472
RAC: 0
Message 6082 - Posted: 13 Nov 2004, 19:41:18 UTC - in response to Message 6079.  

&gt; Hm, which BOINC-Version are you running ?
&gt;
&gt; <a> href="http://www.boinc.dk/index.php?page=user_statistics&amp;project=cpdn&amp;userid=34"&gt;<img> border="0" height="080" src="http://34.cpdn.sig.boinc.dk?188"&gt;</a>
&gt;
&gt; Supporting <b>BOINC</b>, because it is really a <b>great concept !</b>
&gt;
&gt;
Running 4.13 with CP, Seti, and LHC when it has work.
ID: 6082 · Report as offensive     Reply Quote
Yeti
Avatar

Send message
Joined: 5 Aug 04
Posts: 170
Credit: 9,708,411
RAC: 13,727
Message 6084 - Posted: 13 Nov 2004, 20:48:35 UTC

Hm, 4.13 should be okay.

In your history, I can see, that you computer has a timelag from latest trickle to the one before with 5 days. Is this the correct machine ?

If yes, you can see, that the average sec/TS didn't change, I think, this is a good sign. I don't know how far XP home really differs to XP Prof, but maybe, there is a problem with the process-priority.

Do you use the setting: Run Boinc only, if computer is idle ?

Did you try what happens, when you set BOINC to "run always" on client ?



<a href="http://www.boinc.dk/index.php?page=user_statistics&amp;project=cpdn&amp;userid=34"><img border="0" height="080" src="http://34.cpdn.sig.boinc.dk?188"></a>

Supporting <b>BOINC</b>, because it is really a <b>great concept !</b>
ID: 6084 · Report as offensive     Reply Quote
old_user2290

Send message
Joined: 28 Aug 04
Posts: 7
Credit: 119,472
RAC: 0
Message 6114 - Posted: 15 Nov 2004, 4:12:58 UTC - in response to Message 6084.  

&gt; In your history, I can see, that you computer has a timelag from latest
&gt; trickle to the one before with 5 days. Is this the correct machine ?

Yes. It was putting out about a trickle a day until it slowed down.


&gt; Do you use the setting: Run Boinc only, if computer is idle ?

I have tried (without success) to use that for the other computer (a laptop which tends to overheat and shut down when I am in the middle of something), but this is a desktop and is set to always run BOINC.

&gt;
&gt; Did you try what happens, when you set BOINC to "run always" on client ?
&gt;
I just changed the setting, but don't see any immediate change.

ID: 6114 · Report as offensive     Reply Quote
Yeti
Avatar

Send message
Joined: 5 Aug 04
Posts: 170
Credit: 9,708,411
RAC: 13,727
Message 6135 - Posted: 15 Nov 2004, 21:49:19 UTC

Hm, I remember, that in the past there was a problem with some keyboards-drivers; when BOINC was installed, it couldn't install it's drivers to detect wheather computer is idle.

Perhaps you could make a copy of the actual BOINC directory and then install 4.13 over the existing version again. Perhaps this helps.
ID: 6135 · Report as offensive     Reply Quote

Message boards : Number crunching : Lazy CPU

©2024 climateprediction.net