Posts by Admiral

1) Message boards : Number crunching : CPDNSpy 1.3 (Message 3579) Posted 9 Sep 2004 by Admiral_Hawkes Post: > I have been succesfully running CPDNSpy on 4 windowsXP PC's since about late > August. All working well until the first PC to reach phase two and since then > the calculations are all wrong. > It is saying I will take 34 sec/ts when it is actually more like 3.4sec/ts. 70 > hours to next tricle when it is only genarlly about 8-9 hours per trickle. > Any on else had this? Know how to fix it? > I thought initially it was perhaps the set up on the Computer but the same > happened when the next PC went to phase 2. My next PC will be there in about 2 > days. > I very much appreciate CPDNSpy but it not much use with this error. I might > try and reinstall CPDNSpy on one machine to see if that fixes it but I think > it may be more to do with the XML information not being correct. > > > Hey please don't complain eveyr time baout CPDNSpy 1.3.1. Cause of this errors i took it down. I'm just developing the version 1.4. But I have now school again and won't have much time!!! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
2) Message boards : Number crunching : Have to dettach from BOINC (Message 3427) Posted 8 Sep 2004 by Admiral_Hawkes Post: > You can also do the low tech method. Take the side off your case and place a > box fan blowing directly inside. Of course, you'll want to clean very often. > > <a> href="http://www.boinc.dk/index.php?page=user_statistics&project=cpdn&userid=355"><img> border="0" height="80" src="http://355.cpdn.sig.boinc.dk?188"></a> > I've bought 2 additional Fans. But it didn't matter anything! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
3) Message boards : Number crunching : Have to dettach from BOINC (Message 3224) Posted 7 Sep 2004 by Admiral_Hawkes Post: Hi! I\'m sorry to say, but i have to stop my boinc client, because my PC is getting too hot! My MB sometimes reaches teh critical value of 55Â° degree and has to shut down in emergency mode. I\'ve bought 2 new coolers, but they don\'t work properly atm! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
4) Message boards : Number crunching : error message (Message 2730) Posted 2 Sep 2004 by Admiral_Hawkes Post: Does it work now after new installation? <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
5) Message boards : Number crunching : Detaching from project. (Message 2729) Posted 2 Sep 2004 by Admiral_Hawkes Post: Logical because you make this change on one machine Do you plan to dettach ???? <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
6) Message boards : Number crunching : Where has the Server news page gone? (Message 2711) Posted 2 Sep 2004 by Admiral_Hawkes Post: > I'm missing it too ... > > <a> href="http://www.boinc.dk/index.php?page=user_statistics&project=cpdn&userid=34"><img> border="0" height="080" src="http://34.cpdn.sig.boinc.dk?188"></a> > > Supporting <b>BOINC</b>, because it is really a <b>great concept !</b> > > It's here: http://climateapps2.oucs.ox.ac.uk/cpdnboinc/rss_main.php That's the XML File and you can find the news on the Project News page in another Layout! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
7) Message boards : Number crunching : CPDNSpy 1.3 (Message 2650) Posted 2 Sep 2004 by Admiral_Hawkes Post: > Hi, > I have a litle problem with the settings in the Spy. I know that the xml is in > the CPDN folder, but if I open the dialog box it isn't showed?! Also if I > manualy tipe it in no status is reported. > Am I searcing in the wrong directory (slots or projects). > > Running S@h and CPDN. > > <a href="http://www.adastrawithseti.de"><img> src="http://adastrawithseti.de/pic/logo.jpg"></a> > > Greetings from Berlin(Germany) > Basti > You have to enter the path to your boinc directory. E.G.: C:\Boinc not C:\Boinc\ <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
8) Questions and Answers : Windows : How to get CPDN to run for 2 hrs. and Seti for 1 hr. (Message 2544) Posted 1 Sep 2004 by Admiral_Hawkes Post: > > > > > Thanks - re: the time lag you mentioned, what do you mean > > exactly? > > > > > > > > BOINC takes resource debt into consideration. If you've been > running > > a > > > single > > > > project for a while, it could take a couple weeks to balance. > > > > > > > > <a> > > > > > > href="http://www.boinc.dk/index.php?page=user_statistics&project=cpdn&userid=355"><img> > > > border="0" height="80" > src="http://355.cpdn.sig.boinc.dk?188"></a> > > > > > > > I might just leave them as is then. Thanks for the info. > > > > Actually, the behavour has changed with 4.x. The time lag should be less > than > > a day, after it updates from the changed site. The 4.x client maintains > a > > debt that is calculated near real time based on CPU usage and resource > share. > > It should respond within 2 hours or so. > > > > jm7 > > > > > And there does appear to be a bug. In the first 56 hours, CPDN got 24 hours > which is less than the 70% expected in my case. > > jm7 > > Perhaps Boinc stopped due toperformance sue by other programs like games. Check your settings for that! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
9) Questions and Answers : Windows : How to get CPDN to run for 2 hrs. and Seti for 1 hr. (Message 2543) Posted 1 Sep 2004 by Admiral_Hawkes Post: > > > > > Thanks - re: the time lag you mentioned, what do you mean > > exactly? > > > > > > > > BOINC takes resource debt into consideration. If you've been > running > > a > > > single > > > > project for a while, it could take a couple weeks to balance. > > > > > > > > <a> > > > > > > href="http://www.boinc.dk/index.php?page=user_statistics&project=cpdn&userid=355"><img> > > > border="0" height="80" > src="http://355.cpdn.sig.boinc.dk?188"></a> > > > > > > > I might just leave them as is then. Thanks for the info. > > > > Actually, the behavour has changed with 4.x. The time lag should be less > than > > a day, after it updates from the changed site. The 4.x client maintains > a > > debt that is calculated near real time based on CPU usage and resource > share. > > It should respond within 2 hours or so. > > > > jm7 > > > > > And there does appear to be a bug. In the first 56 hours, CPDN got 24 hours > which is less than the 70% expected in my case. > > jm7 > > Perhaps Boinc stopped due toperformance sue by other programs like games. Check your settings for that! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
10) Questions and Answers : Windows : How to get CPDN to run for 2 hrs. and Seti for 1 hr. (Message 2542) Posted 1 Sep 2004 by Admiral_Hawkes Post: > > > > > Thanks - re: the time lag you mentioned, what do you mean > > exactly? > > > > > > > > BOINC takes resource debt into consideration. If you've been > running > > a > > > single > > > > project for a while, it could take a couple weeks to balance. > > > > > > > > <a> > > > > > > href="http://www.boinc.dk/index.php?page=user_statistics&project=cpdn&userid=355"><img> > > > border="0" height="80" > src="http://355.cpdn.sig.boinc.dk?188"></a> > > > > > > > I might just leave them as is then. Thanks for the info. > > > > Actually, the behavour has changed with 4.x. The time lag should be less > than > > a day, after it updates from the changed site. The 4.x client maintains > a > > debt that is calculated near real time based on CPU usage and resource > share. > > It should respond within 2 hours or so. > > > > jm7 > > > > > And there does appear to be a bug. In the first 56 hours, CPDN got 24 hours > which is less than the 70% expected in my case. > > jm7 > > Perhaps Boinc stopped due toperformance sue by other programs like games. Check your settings for that! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
11) Questions and Answers : Windows : How to get CPDN to run for 2 hrs. and Seti for 1 hr. (Message 2541) Posted 1 Sep 2004 by Admiral_Hawkes Post: > > > > > Thanks - re: the time lag you mentioned, what do you mean > > exactly? > > > > > > > > BOINC takes resource debt into consideration. If you've been > running > > a > > > single > > > > project for a while, it could take a couple weeks to balance. > > > > > > > > <a> > > > > > > href="http://www.boinc.dk/index.php?page=user_statistics&project=cpdn&userid=355"><img> > > > border="0" height="80" > src="http://355.cpdn.sig.boinc.dk?188"></a> > > > > > > > I might just leave them as is then. Thanks for the info. > > > > Actually, the behavour has changed with 4.x. The time lag should be less > than > > a day, after it updates from the changed site. The 4.x client maintains > a > > debt that is calculated near real time based on CPU usage and resource > share. > > It should respond within 2 hours or so. > > > > jm7 > > > > > And there does appear to be a bug. In the first 56 hours, CPDN got 24 hours > which is less than the 70% expected in my case. > > jm7 > > Perhaps Boinc stopped due toperformance sue by other programs like games. Check your settings for that! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
12) Message boards : Number crunching : Ranking (Message 2539) Posted 1 Sep 2004 by Admiral_Hawkes Post: Not here on the page, but here: <a href="http://www.setisynergy.com/stats/boinc-stats_cpdn.php?id=3191">http://www.setisynergy.com/stats/boinc-stats_cpdn.php?id=3191</a> <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
13) Message boards : Number crunching : Problem using CDNspy (Message 2486) Posted 1 Sep 2004 by Admiral_Hawkes Post: > > > Oh for some decent smilies on this board ... > > > > > > Excellent work there, Dogbytes > > > > > > ROFL > > > > > > <a href="http://www.teampicard.net"><img> > > > src="http://www.teampicard.net/templates/fisubice/images/phpbb2_logo.jpg"></a><a> > > > href="http://climateapps2.oucs.ox.ac.uk/cpdnboinc/team_display.php?teamid=3">Join > > > us here</a> > > > > > > > Sorry, sorry Guys. This was my first holiday since 4 years. It might be > > helpfull if someone with this error could send me his client_state.xml > and his > > sched_x xml files to oliver@kliebisch.net. A white Screen can only happen > in > > the program if you are using a java version older than 1.4(or might be > 1.5 > > beta It's full of bugs) or the program has a problem with reading the > XML > > Files. > > <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13"> > > > > The other problem is CPDNSpy wont run if winrar is installed, I had to > uninstall winrar to get it to work. > > Can you make CPDNSpy an .exe rather a .jar file? > > > K, can make it.You won't have to uninstall WinRar! just create a .bat File with this content: java -jar CPDNSpy.jar <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
14) Message boards : Number crunching : Problem using CDNspy (Message 2474) Posted 1 Sep 2004 by Admiral_Hawkes Post: > Oh for some decent smilies on this board ... > > Excellent work there, Dogbytes > > ROFL > > <a href="http://www.teampicard.net"><img> src="http://www.teampicard.net/templates/fisubice/images/phpbb2_logo.jpg"></a><a> href="http://climateapps2.oucs.ox.ac.uk/cpdnboinc/team_display.php?teamid=3">Join > us here</a> > Sorry, sorry Guys. This was my first holiday since 4 years. It might be helpfull if someone with this error could send me his client_state.xml and his sched_x xml files to oliver@kliebisch.net. A white Screen can only happen in the program if you are using a java version older than 1.4(or might be 1.5 beta It's full of bugs) or the program has a problem with reading the XML Files. <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
15) Message boards : Number crunching : CPDNSpy 1.3 (Message 2473) Posted 1 Sep 2004 by Admiral_Hawkes Post: > It would be a nice feature if CPDnSpy would work with hyperthreading. I have > v1.3.1 and it only shows one WU and not both wihich are being crunched at the > same time. Or did I miss something, somewhere's. Any chance of a fix for this? > Otherwise I like it. :) Well done. > > > <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=35&team=off"><a> href="http://mysite.wanadoo-members.co.uk/thefinalfrontear/index.html">Team > Link<a> > No sorry, not at this time! But in 1.4(I'm currently working on it) I plan this features: -Benchmark cpmparission with Carls CPU Table -Multi WU Support(even through networks) -Proxy support -and some small thinks <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
16) Message boards : climateprediction.net Science : Exit code -5 (0xfffffffb) ??? (Message 1481) Posted 22 Aug 2004 by Admiral_Hawkes Post: > > Hello > > > > I had 2 runs and both crashed with Error - EXIT CODE -5 (0xffffffb). > > > > Can anyone tell me the reason ??? > > > > a number of people have had this, and it usually seems to be a "Negative > pressure value" calculated. I think I've isolated the problem and am > hopefully going to have a fix by launch this Thursday. > > It can also happen if the model process is manually ended! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
17) Message boards : Number crunching : CPDNSpy 1.3 (Message 1450) Posted 22 Aug 2004 by Admiral_Hawkes Post: because I'm away for 2 weeks i have to take CPDNSpy down to avoid Traffic Overload. Don't host CPDnSpy on other site. It was liek a beta. as soon as I'm back and Boinc goes public I write a new evrsion and make it public! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
18) Message boards : Cafe CPDN : Congratz to the CPDN team (Message 1387) Posted 21 Aug 2004 by Admiral_Hawkes Post: > actually dogbytes, that's a pretty good idea, I'll look into it. I was > thinking of maybe having something in the scheduler to limit the big app > downloads to 1000 per hour (about 10GB of traffic per hour); or I may just > setup a bunch of schedulers with apps to deliver (so when a client hits > climateprediction.net it will get a random scheduler to load balance). > > > hmm, if you've managed the traffic of the old CPDN start you'll manage thi start too! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
19) Message boards : Number crunching : bad linux performance (Message 1344) Posted 20 Aug 2004 by Admiral_Hawkes Post: Strange.... i have a great performance udner Linux. Check if you swap space is right had a problem with boinc and the swap <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">
20) Message boards : Number crunching : Just set up WinXp 64 pro (Message 1337) Posted 20 Aug 2004 by Admiral_Hawkes Post: > > Hi! I just set up WinXP 64 Pro on my PC. It's beta but i tried to start > Boinc. > > t works because WinXP 64 seems to have a gerat emulator, but do i have a > bit > > more performance even if i emulate 32 Bit client???? > > <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13"> > > I don't know, I wouldn't have thought so since it seems it has to do a bit of > work to keep 32-bit emulation. I guess eventually we'll have 64-bit BOINC > clients and apps. These models were always designed & run on 64-bit > machines (i.e. Cray) so perhaps they'll be more at home on them! > > Yeah it works, but have with Measured integer speed 4949.1 million ops/sec nearly the same performance as at 32 Bit! <img src="http://boinc.mundayweb.com/cpdn/stats.php?userID=13">

Next 20

Posts by Admiral_Hawkes