climateprediction.net home page
Show Graphics button gives no response

Show Graphics button gives no response

Questions and Answers : Unix/Linux : Show Graphics button gives no response
Message board moderation

To post messages, you must log in.

AuthorMessage
old_user1128

Send message
Joined: 25 Aug 04
Posts: 4
Credit: 396,264
RAC: 0
Message 23939 - Posted: 15 Aug 2006, 10:36:24 UTC

Hi,

I\'ve got BOINC running climateprediction.net on my Gentoo linux server and it seems to be going ok. The task I\'ve got at the moment is at 0.104% and seems to be running fine.

However, when I click the Show Graphics button, absolutely nothing happens. No new window appears showing the graphics, no error is given, nothing.

I\'m guessing this shouldn\'t be happening...and if I\'m correct, then what should I do to make it work?

Cheers,

Robin
ID: 23939 · Report as offensive     Reply Quote
Profile astroWX
Volunteer moderator

Send message
Joined: 5 Aug 04
Posts: 1496
Credit: 95,522,203
RAC: 0
Message 23942 - Posted: 15 Aug 2006, 16:39:04 UTC

Hi, Robin, welcome to the Boards.

Does the CPDN Model indicate \"Running\" in the Work (or Tasks) Tab?

Is CPDN running with other projects? Nothing will show in CPDN graphics when the Model is suspended in favor of another Project.

Do you click in the CPDN run, in the Work (or Tasks) Tab? That\'s necessary to activate the \'Show Graphics\' button. Is the Button greyed-out?

If memory serves, there have been issues with Gentoo. A Board \'search\' should indicate troubles other Gentoo users have had with CPDN.
"We have met the enemy and he is us." -- Pogo
Greetings from coastal Washington state, the scenic US Pacific Northwest.
ID: 23942 · Report as offensive     Reply Quote
old_user1128

Send message
Joined: 25 Aug 04
Posts: 4
Credit: 396,264
RAC: 0
Message 23943 - Posted: 15 Aug 2006, 16:53:29 UTC - in response to Message 23942.  

Hi,

The CPDN model is shown as running in the Tasks tab, the button isn\'t greyed out, and I have selected the line in the tasks box before pressing the show graphics button.

I did a board search for \"gentoo\" and the only thread which came up was this thread...

Any other ideas?

Robin
ID: 23943 · Report as offensive     Reply Quote
Desti

Send message
Joined: 6 Aug 04
Posts: 124
Credit: 9,195,838
RAC: 0
Message 23965 - Posted: 16 Aug 2006, 22:32:27 UTC

What BOINC version do you have?

Linux Users Everywhere @ BOINC
ID: 23965 · Report as offensive     Reply Quote
old_user1128

Send message
Joined: 25 Aug 04
Posts: 4
Credit: 396,264
RAC: 0
Message 23985 - Posted: 17 Aug 2006, 13:58:53 UTC - in response to Message 23965.  

What BOINC version do you have?


I am running BOINC version 5.4.9, for i686-pc-linux-gnu.

Robin
ID: 23985 · Report as offensive     Reply Quote
Desti

Send message
Joined: 6 Aug 04
Posts: 124
Credit: 9,195,838
RAC: 0
Message 24003 - Posted: 17 Aug 2006, 22:35:57 UTC

Do the graphic start when you start the sulphur_gfx* manualy?
Linux Users Everywhere @ BOINC
ID: 24003 · Report as offensive     Reply Quote
old_user1128

Send message
Joined: 25 Aug 04
Posts: 4
Credit: 396,264
RAC: 0
Message 24006 - Posted: 17 Aug 2006, 23:11:50 UTC - in response to Message 24003.  

Do the graphic start when you start the sulphur_gfx* manualy?


Hi - where should I look for the sulpher_gfx* command? I can\'t find it in the BOINC directory, or in the system path.

Cheers,

Robin
ID: 24006 · Report as offensive     Reply Quote
belgix

Send message
Joined: 5 Aug 04
Posts: 85
Credit: 2,924,043
RAC: 0
Message 24053 - Posted: 20 Aug 2006, 10:46:33 UTC - in response to Message 23942.  

If memory serves, there have been issues with Gentoo. A Board \'search\' should indicate troubles other Gentoo users have had with CPDN.


No major problem here with Gentoo 2006.0 (~x86). Take care if you have Xorg 7.1 installed in your box. The latest release of xorg-server is really a little crap with some video cards when DRI is enabled (leading to problems for applications that depends on OpenGL to run).

With Xorg 7.0 & boinc 5.5.13, it \"just works\".

P.S. sulphur_glx* is for the old SULPHUR experiment. Unless you are running an old WU, you don\'t have it in your box.


ID: 24053 · Report as offensive     Reply Quote
Profile astroWX
Volunteer moderator

Send message
Joined: 5 Aug 04
Posts: 1496
Credit: 95,522,203
RAC: 0
Message 24055 - Posted: 20 Aug 2006, 16:40:57 UTC


Thanks, belgix, good to know.
"We have met the enemy and he is us." -- Pogo
Greetings from coastal Washington state, the scenic US Pacific Northwest.
ID: 24055 · Report as offensive     Reply Quote
Romeo Mikulić

Send message
Joined: 17 Dec 04
Posts: 2
Credit: 1,084,000
RAC: 2,865
Message 24062 - Posted: 22 Aug 2006, 16:38:20 UTC - in response to Message 23939.  


Run \"xhost localhost\" at the command prompt before clicking on the \"Show graphics\" button.
Before doing that, I recommend running \"man xhost\" and doing some reading :).
ID: 24062 · Report as offensive     Reply Quote
old_user213155

Send message
Joined: 12 Dec 06
Posts: 2
Credit: 45,179
RAC: 0
Message 25831 - Posted: 3 Jan 2007, 15:59:50 UTC

I also have the problem that the \'Show Graphics\' button gives no response.
I am using Debian Linux \'Etch\' release.
The BOINC client and server are otherwise working fine, doing their calculations and reporting the results. (BOINC manager version 5.4.11)

I would still like to see the visualisation graphics though.

NB: I have tried doing Run \"xhost localhost\", but this did not affect things.
Has anyone else managed to get the graphics working under Debian Linux?

Regards,
Nick Lee
ID: 25831 · Report as offensive     Reply Quote
old_user213155

Send message
Joined: 12 Dec 06
Posts: 2
Credit: 45,179
RAC: 0
Message 25835 - Posted: 4 Jan 2007, 11:35:34 UTC - in response to Message 25831.  

I also have the problem that the \'Show Graphics\' button gives no response.
I am using Debian Linux \'Etch\' release.
The BOINC client and server are otherwise working fine, doing their calculations and reporting the results. (BOINC manager version 5.4.11)

I would still like to see the visualisation graphics though.

NB: I have tried doing Run \"xhost localhost\", but this did not affect things.
Has anyone else managed to get the graphics working under Debian Linux?

Regards,
Nick Lee


Problem Solved!
See http://wiki.debian.org/BOINC
Quoted Below...

Graphics

Graphics are supported, but they won\'t show up by default. The X display needs to be accessible to the BOINC graphics processes in order to see the interesting graphics for, e.g., Einstein@Home, and it isn\'t by default.

Your X display can be made accessible to all local UNIX socket connections, including the ones from BOINC, by running

xhost +local:

This is generally safe on single-user machines, though not ideal. It is a bad idea on multi-user machines, so don\'t do it there.

Then, the \"Show graphics\" button in boincmgr, or the --result ... graphics_window option to boinc_cmd, will actually work. Unfortunately, when it doesn\'t work because of failed X authorization, it does not report the error back to boinc_cmd or boinc_mgr, and the only trace of the error is in some log file in the result directory /var/lib/boinc-client/slots/<whatever>
ID: 25835 · Report as offensive     Reply Quote
Profile astroWX
Volunteer moderator

Send message
Joined: 5 Aug 04
Posts: 1496
Credit: 95,522,203
RAC: 0
Message 25838 - Posted: 4 Jan 2007, 19:15:38 UTC

Thanks, Nick; good to know.

"We have met the enemy and he is us." -- Pogo
Greetings from coastal Washington state, the scenic US Pacific Northwest.
ID: 25838 · Report as offensive     Reply Quote

Questions and Answers : Unix/Linux : Show Graphics button gives no response

©2024 climateprediction.net